Description
Single Polymer Bondwell 5010 (Wall Putty) | Single Polymer Bondwell 5050 (Tile Adhesive)
White to slightly off-white and free-flowing Powder
Product Specification:-
Chemical basis: Modified Cellulose
Ether Viscosity: 175,000 -2, 00,000 Mpa.s (NDJ-1, 2% solution,20°C) 75,000-90,000 mPa.S (Brookfield-RV,2% solution, 20°C)
Particle size: <100um:mm.65%
Content of NaCl: ≤ 1.5% Moisture content: ≤ 6%
Bulk density: 200 – 500 g/l
Ash Content: ≤ 5%
pH Value: 6.0-8.0
Application: Modified Cellulose Ether is a specially designed Polymer for Lime based applications like lime based Plasters/ Render, Skim Coats/Wall putty & External thermalinsulation system. The product is one of a kind and can be used with or without addition of cement.No need to add MHEC, RD Powder, PVA or any other Glue.
Physical Properties:
- Form – Powder
- Solubility- Soluble in Water
- Moisture Content – Less than 5%
Dosage: 10 Kg in 1 MT Batch
NOTE: Percentage may vary depending upon Quality and Atmosphere Modified Cellulose Ether has been developed to improve the workability Properties of Portland Cement and lime based dry Mortars such as Plaster,Render, Tile Cement and EIFS mortar.
Feature: Excellent workability & CoverageHigh Water Retention High Thermal Stability Good Adhesion Strength
Packing: 25 Kg in HDPE Bag
Storage: Modified Cellulose Ether is a non-perishable product. It is recommended to use the product in rotating on a first in first out basis. The product should be stored under dry and clean conditions in its original packaging and away from heat. The product is hydroscopic. The packaging is selected in a way to avoid ingress of moisture, but the water content of the packed product will may increase if not stored dry.
Product Safety: According to the EU legislation on dangerous substances and preparations, It is not hazardous. Dust formation and dust deposits should be avoided. Spilled products should be swept up in their dry state – in contact with water there isa risk of slipping / skidding. Please observe this information on handling and safety measures. Any general information given is no substitute for the detailed data and instructions given on the Material Safety Data Sheet.
